Hello dear Amigurumi Knitting Lovers,Today we share a free amigurumi crochet pattern for you.
As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Don’t forget to subscribe to receive notifications of our new free recipes.
Today, the new daily crochet pattern Amigurumi Santa Claus Free Crochet Pattern, I want to give you some information about this pattern;
Materials and tools
Yarn Alize “Cotton Gold”, 55% cotton, 45% acrylic, 330 m / 100 g.
Head, nose – flesh colors: No. 382 (powder) or No. 67 (light beige)
Fur coat, hat No. 56 (red)
Boots No. 493 (brown)
Fur coat and hat trim No. 55 (white)
Also suitable: YarnArt “Jeans”, Gazzal “Baby Cotton”, “Caramelka”
Kamteks, “Children’s novelty” or “Children’s voluminous” from Pekhorka or another
yarn of similar parameters in terms of yardage, weight and composition with those listed.
Sew-on eyes 4 mm (2 pcs.). I use sew-on plastic eyes “HobbyBe” SOP-4 (d=4 mm).
Hook No. 1.7
Holofiber for stuffing
Reinforced thread (for sewing eyes)
Big eye needle
Fine sewing needle
Scissors
Pins with balls
Tweezers, stuffing stick
Marker thread (thread in contrasting color)
The size of the toy from the heels to the top of the head is ~ 12 cm, and to the top of the cap with pompom ~ 14 cm.
Conventions
ch – air loop
magic ring – amigurumi ring
sc – single crochet
prib – increase from single crochets (2 sc in 1 loop)
dec – single crochet dec (2 sc knitted together)
hdc – half double crochet
dc – single crochet
dec_dc – single crochet dec (2 dc knitted together)
C2H – double crochet
slst – connecting column
– just a plus, to connect parts of the circuit
Handles (2 pcs.)
Red color yarn.
1st row: 6 sc in magic ring
2nd row: 6 PRIB (12)
3-4 rows (2 rows): 12 sc
5 row: 5 sc, “knob” of 4 dc (thumb), 6 sc (12)
6 row: (1 sc, dec) * 4 (8)
Stuff the resulting mitten filler, the rest hands are not required.
7-14 rows (8 rows): 8 sc
Tie 1-2 sc to the middle back of the hand, do slst.
Cut the thread, leaving small tip.
Sleeve trim
The sleeve trim on each handle is knitted with white yarn.
1 row: Knit 8 sc, inserting the hook into the holes between the 6th and 7th
rows (under the legs of the columns of the 6th row). Start from the back hands.
2 row: 8 sc in the loops of the columns of the 1st row. At the end, fix slst and hide threads.
Torso
Knitted from bottom to top.
Red color yarn.
1st row: 6 sc in magic ring
2nd row: 6 PRIB (12)
3 row: (1 sc, PRIB) * 6 (18)
4 row: (2 sc, PRIB) * 6 (24)
5 row: (3 sc, PRIB) * 6 (30)
6 row: (4 sc, PRIB) * 6 (36)
7 row: (5 sc, PRIB) * 6 (42)
8 row: (6 sc, PRIB) * 6 (48)
9-19 rows (11 rows): 48 sc
20 row: (6 sc, dec) * 6 (42)
21 row: 42 sc
22 row: (5 sc, dec) * 6 (36)
23rd row: 36 sc
24 row: (4 sc, dec) * 6 (30)
Handles will be knitted in the next row. Top edges of handles
fold in half along the thumb and knit together with body cloth.
25 row: 6 sc + 4 sc (knitting the left hand) + 11 sc + 4 sc
(tying in the right hand) + 5 sc (30)
26 row: (3 sc, dec) * 6 (24)
At this point, you can start stuffing the body.
27 row: 24 sc
28 row: (2 sc, dec) * 6 (18)
29 row: (1 sc, dec) * 6 (12)
30 row: 6 dec (6)
Finish stuffing. Cut the thread, leaving a long end for head sewing.
Head
Knitted top down.
Flesh color yarn.
1st row: 6 sc in magic ring
2nd row: 6 PRIB (12)
3 row: (1 sc, PRIB) * 6 (18)
4 row: (2 sc, PRIB) * 6 (24)
5 row: (3 sc, PRIB) * 6 (30)
6 row: 30 sc
7 row: (4 sc, PRIB) * 6 (36)
8-13 rows (6 rows): 36 sc
14 row: (4 sc, dec) * 6 (30)
15 row: (3 sc, dec) * 6 (24)
In this place, you can gradually begin to fill your head.
16 row: (2 sc, dec) * 6 (18)
17 row: (1 sc, dec) * 6 (12)
18 row: 6 dec (6)
Finish stuffing, pull the hole with a needle.
Nose
Flesh color yarn.
Dial 3 ch
1 row: 1 sc, 3 sc in one last loop, turn in a spiral and along
other side of the chain do prib (6)
2nd row: 6 PRIB (12)
3rd row: 12 sc
4 row: 6 dec, slst
Stuff the nose with filler. Leave the end of the thread for sewing to head.
Valenki (2 pcs.)
Brown yarn.
Dial 6 ch. The first 2 rows are knitted according to the principle of an oval in a spiral without lifting loops.
From the second loop from the hook:
1 row: 4 sc, 3 sc in one last loop of the air chain, turn in a spiral and continue on the other side of the chain 3 sc, PRIB (12 loops)
2nd row: prib, 3 sc, 3 PRIB, 3 sc, 2 PRIB (18)
3-4 rows (2 rows): 18 sc
If necessary, align the marker to the center of the back of the part.
5 row: 6 sc, 3 dec_dc, 6 sc (15)
6th row: 4 sc, 3 dec, 5 sc (12)
7-8 rows (2 rows): 12 sc
At the end of slst. Leave the end of the thread for sewing to the body.
Fill boots with filler.
Beard
White color yarn. Knitted from bottom to top.
Dial 2 ch.
It is necessary to knit 17 turning rows (at the beginning of the row lifting ch) single crochet, while in the last loop of each row is done increase. In the 17th row you should get 19 loops.
Next, the last 18 row:
3ch,4 C2H, 2 dc, 1 hdc, 1 sc, 3slst, 1 sc, 1 hdc, 2 dc, 4 С2Н (19)
Fasten, leave the end of the thread for sewing to the head. Hide the beginning tip.
Cap
White color yarn.
Leave the initial end of the thread longer so that you can use it later for sewing to the head.
Dial 42 hours.
1 row: work 1 sc in the 1st air loop of the chain, closing it in ring, knit another 41 sc (42)
2nd row: 42 sc
Red color yarn.
3rd row: 42 sc
4 row: (12 sc, dec) * 3 (39)
5th row: 39 sc
6 row: (11 sc, dec) * 3 (36)
7 row: (10 sc, dec) * 3 (33)
8 row: (9 sc, dec) * 3 (30)
9 row: (8 sc, dec) * 3 (27)
10 row: (7 sc, dec) * 3 (24)
11 row: (6 sc, dec) * 3 (21)
12 row: (5 sc, dec) * 3 (18)
13 row: (4 sc, dec) * 3 (15)
14 row: (3 sc, dec) * 3 (12)
15 row: (2 sc, dec) * 3 (9)
16 row: (1 sc, dec) * 3 (6)
Fasten and hide the end of the thread.
Pom pom on a hat
White color yarn.
1st row: 6 sc in magic ring
2nd row: 6 PRIB (12)
3 – 4 rows (2 rows): 12 sc
5 row: 6 dec
Fill with filler. Leave the end of the thread for sewing to the hat.
Sew on a pom-pom.
Finishing on the bottom of the coat
White color yarn.
Leave at the beginning of knitting long end of thread sewing details to the body.
Dial 43 hours. Knitting turning rows.
1 row: 42 sc, turn
2 row: ch, 42 hdc.
Fasten, cut the thread, tip hide.
Collar and front trim
White color yarn.
Dial 49 ch.
1 row: 47 sc in the air chain, 3 sc in the last loop, turn
and 46 sc on the other side of the chain, inc, slst (98)
Leave the long end of the thread for sewing to the body, the initial tip can be hidden.
Pockets (2 pcs.)
White color yarn.
Dial 6 ch, knit 5 sc, make another sl-st in the 5th loop.
Leave the end of the thread for sewing to the body.
Hide the beginning tip.
Assembly
Before sewing, it is necessary to fasten the parts with pins, checking the symmetry of their arrangement.
The spout is sewn to the head so that its center is at the level 11th row of the head.
The eyes are sewn close to each other over the nose with reinforced thread, folded in half. One hole needs to be marked between the columns from the bottom of the back of the head for the insertion and withdrawal of the needle, where all the ends of the threads will come out.
The following steps are repeated for both eyes:
- The needle is inserted into the selected hole so that the tip of the thread remains for tying.
- Then it is displayed at the place where the eye is attached.
- After stringing the eye, it is brought back into the hole at the back heads.
At the end, the ends of the threads from each eye are pulled up a little and tied together with several knots. Then exit through the hole where they come out, deep into the head (the knots go inside).
Sewing on the head is carried out approximately on the penultimate row torso (3 rows above the arms), along the line of maximum contact with body in this place. In this case, the columns are alternately grabbed canvases of the head, then the columns of the canvas of the body.
The beard is positioned so that the end left for sewing the thread was on the right side of the toy. At the same time, the recess in the central part of the beard is directly under the nose, and the side corners
beards are fixed approximately under the row on which the eyes are sewn.
Sewing is carried out for the back half-loops.
The hat is sewn along the edge so that in front from the eyes to the edge of the hat there was a distance of 1 row, and behind the edge of the cap passed close to the bottom heads.
Felt boots are sewn from the bottom of the body in the center, while the distance from center to the inner edge of each felt boot 1-1.5 rows.
Finishing on the bottom of the fur coat. The front side will be the side where it is face of the 1st row sc. Sewn on the front and sides under the 9th row of the body, slightly higher towards the rear so that the trim arrangement is as horizontal as possible. At the end, the edges of the trim are sewn together.
Finishing on the front and collar of the fur coat. The edge of the part with the tip left the thread is adjacent to the bottom trim of the fur coat. Further, the canvas of the part goes straight,
imitating fur along the fastener, and the second edge of the part wraps around the neck (gate). It is enough to sew the trim along the front and fasten the second edge.
The pockets are sewn slightly diagonally so that the bottom edges were located through 3 rows from the finish along the bottom of the fur coat, and the upper ones – through 3 column from finishing a fur coat along the front.
At the end of sewing on the details, the threads are fixed and hidden in the body. toys.
FINISH
