Amigurumi Frankie Frog Free Crochet Pattern

Hello dear Amigurumi Knitting Lovers,Today we share a free amigurumi crochet pattern for you.
As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Don’t forget to subscribe to receive notifications of our new free recipes.

Today, the new daily crochet pattern Amigurumi Frankie Frog Free Crochet Pattern, I want to give you some information about this pattern;

List of recommended materials and tools:

Green yarn No 69 YarnArt JEANS – 60g;
White yarn No 55 ALIZE Cotton Gold – 5 g;
Red yarn No 90 YarnArt JEANS – 20 g;
Light green yarn No 29 YarnArt JEANS – 5 g;
Brown yarn No 40 YarnArt JEANS – 10 g;
Beige yarn No 48 YarnArt JEANS – 10 g;
Toy stuffing (any polyfill fiber);
Eyes with the diameter of 12 mm;
Crochet hook “Clover” size 2.25 mm or a normal crochet hook size 2.0 mm;
White button 10-12 mm;
Wire 0,8-0,9 mm (see photo);
Pliers (to cut the wire) (see photo);
Tape (see photo)

Final size of the work is 24 cm.

Abbreviations (us crochet terms):
Ch – chain stitch
Sc – single crochet
Inc – single crochet increase (work 2 sc into one stitch)
Dec – single crochet decrease (close 2 sc together)
Sl st – slip stitch
Dr st – drift stitch
Drift stitch (dr st) is the first stitch of the new rang (it is crocheted
like sc), the second stitch, following it, is considered the beginning of this round.

Pattern notes:
• Crochet in continuous spiral rows, do not join at the end of the row
with slip stitches and do not turn the work unless instructed to do so;
• Use a different color marker yarn at the beginning of the row to mark
the first stitch of each new row;
• To crochet this toy, it is better to use the materials that are
prescribed above. It is possible to substitute a yarn similar in
composition or yarn thickness;
• The density of toy filling is medium.

HOW TO MAKE FRANKIE THE FROG
HEAD
Take the green yarn.
1 round. Start 6 sc in a magic ring (6)
2 round. Increase 6 times (12) 3 round. (1 sc, inc)6 times (18)
4 round. 1 sc, inc, (2 sc, inc)5 times, 1 sc (24) 5 round. (3 sc, inc)6 times (30)
6 round. 2 sc, inc, (4 sc, inc)5 times, 2 sc (36) 7 round. (5 sc, inc)6 times (42)
8 round. 42 sc (42)
9 round. 3 sc, inc, (6 sc, inc)5 times, 3 sc (48) 10 round. 48 sc (48) 11 round. (7 sc, inc)6 times (54)
12 round. 54 sc (54 sc)
13 round. 4 sc, inc, (8 sc, inc)5 times, 4 sc (60) 14 round. 60 sc (60). 15 round. (9 sc, inc)6 times (66)
16-24 round. 66 sc (9 rounds)
25 round. (9 sc, dec)6 times (60) 26 round. 4 sc, dec, (8 sc, dec)5 times, 4 sc(54)
27 round. (7 sc, dec)6 times (48) 28 round. 3 sc, dec, (6 sc, dec)5 times, 3 sc (42)
29 round. (5 sc, dec)6 times (36) 30 round. (1 sc, dec)12 times (24)
31 round. 1 sc, dec, (2 sc, dec)5 times, 1 sc (18) 5 32 round. (4 sc, dec)3 times (15)
Fill the head with the filler (photo 1). Fix and cut down the thread, leave
30 cm to sew the head to the body.

EYES
Crochet with the white yarn.
1 round. Crochet 10 sc in a magic ring. Before tighten the magic ring,
insert the eyes 12 mm in the hole. Tighten the magic ring and make a slip
stitch (10) (photo 2).

2 round. Increase 10 times (20) 3 round. (4 sc, inc)4 times (24)
Change the main thread for green color.
4 round. 24 sc (photo 3)
At the wrong side of the piece fix the eyes with the clips (photo 4)

5-8 round. 24 sc (4 rounds)
9 round. 1 sc, dec, (2 sc, dec)5 times, 1 sc (18) 10 round. (1 sc, dec)6 times (12)
Fill the piece with the filler.
11 round. Decrease*6 times (6)
Fix and cut down the thread, leave 30 cm for sewing. Tighten the ole of
the piece, pull the thread in the whole between stitches at the level of round 5.
Crochet the second eye in the same way (photo 5).

TIGHTENING AND DESIGN OF THE FACE
Mark eyes and mouth with the pins. The eyes are located between the
rounds 8 and 9, at the distance of 14 stitches (points 1 and 2). Points for
tightening the mouth are located between the rounds 22 and 23 at the
distance of 18 stitches from each other (points 3 and 4) (photo 6).
Take the green yarn and a needle. Insert the needle from the bottom
into the head hole and leave the small end of the yarn outside the piece.
Thread the needle between the stitches at point 1, go down one stitch
and thread the needle into the hole between the stitches. Then thread
the needle between the stitches in point 4 and tighten the thread, then
go down one stitch and thread the needle through the hole between the
stitches (photos 7,8,9). Repeat with points 1 and 4 again and thread the
needle in point 4.

Go down one stitch at point 4 and take the needle out at point 2. Then
drop down one stitch, put the needle in the hole between the stitches,
and take it out at point 3. Tighten the thread. Similarly, go down one
stitch, put the needle in the hole between the stitches and take out the
needle in point 2. Tighten the thread (photos 10,11,12)

Repeat the action and thread the needle into the hole in the pattern.
Tighten the ends, tie them in a knot, cut the thread, and thread the ends
inside the piece. The tightening is ready (photo 13).

Sew eyes to the head at points 1 and 2 (photo 14). Take light green yarn
and with straight stitches embroider the mouth and nostrils (photo 15).

WARTS
Make the warts of light green yarn as follows: 8 sc in the circle.
Fix and cut down the thread, leave 20 cm for sewing. Make the second
wart in the same way.
Make the third wart in the same way, but make the circle of 6 sc.
Sew the warts on the head (photo 16).

UPPER LEGS
Start from the fingers. Take the green yarn.
1 round. Start 6 sc in a magic ring (6)
2 round. Increase6 times (12) 3-4 round. 12 sc (2 rounds) 5 round. Decrease6 times (6)
6-9 round. 6 sc (4 rounds)
We have one finger.
Make 3 pieces (photo 17). In two of the fingers, cut the thread and
fasten it. Don’t cut the thread from the third finger, let’s call it finger

The rest of the fingers are number 2 and 3. The numbers of these fingers don’t matter, these fingers are the same. Which of them will be under which number – it does not matter, they are the same. Fingers do not need to be stuffed, only the tips are stuffed, because later we will insert a wire into them. 10 round. 3 sc on the first finger, 3 sc on the second finger, 6 sc on the third finger, 3 sc on the second finger, 3 sc on the first finger (18) (photo 18).

Insert into the leg the wire for the frame.
Cut 2 pieces of 12 cm and 1 long piece of 40 cm, fold each wire in half
(photo 19). Don’t insulate the ends of the wire with adhesive tape. Insert
the long wire in the middle finger and insert the short sections in the
rest fingers. Twist the short ends of the wire with the long one and
insulate with adhesive tape (photo 20).

11-13 round. 18 sc (3 rounds)
14 round. 2 sc, dec, (4 sc, dec)2 times, 2 sc (15) 15 round. 15 sc (15) 16 round. (3 sc, dec)3 times (12)
17 round. (4 sc, dec)*2 times (10)
Fill the piece with the filler.
18-26 round. 10 sc (9 rounds)
Fill the piece with the filler.
27-36 round. 10 sc (10 rounds)
Fix and cut down the thread. Fill the piece with the filler. Take green
yarn and sew the holes between the fingers on the leg. Make the second
upper leg in the same way (photo 21)

LOWER LEGS
Also, insert wire for frame into the lower legs. For each leg, twist 70 cm
of the wire. Bend the piece in two halves and twist them in a single wire,
isolate the sharp end of the wire with the tape (photo 22). Do the same
with the second piece of wire.
Start from the fingers. Take green yarn.
1 round. Start 7 sc in a magic ring (7)
2 round. Increase7 times (14) 3-4 round. 14 sc (2 rounds) 5 round. Decrease7 times (7)
6-9 round. 7 sc (4 rounds)
We have one finger.
Make 3 pieces (photo 23). In two of the fingers, cut the thread and
fasten it. Don’t cut the thread from the third finger, let’s call it finger

The rest of the fingers are number 2 and 3. The numbers of these fingers don’t matter, these fingers are the same. Stuff the fingers 1 and 3 up to the end. For finger 2, only the tip must be stuffed, because the wire will be inserted in this finger.

10 round. 4 sc on the first finger, 4 sc on the second finger, 7 sc on
the third finger, 3 sc on the second finger, 3 sc on the first finger (21)
11-12 round. 21 sc (2 rounds)
13 round. (5 sc, dec)*3 times (18)
14-15 round. 18 sc (2 rounds)
Insert the wire into the middle finger (photo 24). Bend the wire upwards
up to the crocheted part of the piece (photo 25).
16 round. 5 sc, 1 ch, skip 1 stitch, leave the wire in the piece, the wire
should go out of the hole, 12 sc (18) (photo 25)

17 round. 2 sc, dec, (4 sc, dec)2 times, 2 sc (15) 18 round. (3 sc, dec)3 times (12)
Fill the piece with the filler.
19 round. Decrease*6 times (6)
Fix and tighten the thread (photo 26).
On the leg, around the wire, crochet 12 sc, it is the first round of the
leg continuation (photo 27)

2-13 round. 12 sc (12 rounds)
Fill the piece with the filler.
Change the main thread for red thread.
14 round. 12 sc (12)
15 round. (only through back of the stitch) 12 sc (12)
16-17 round. 12 sc (2 rounds)
18 round. (3 sc, inc)3 times (15) 19 round. 15 sc (15) 20 round. 2 sc, inc, (4 sc, inc)2 times, 2 sc (18)
Crochet up to the middle of the leg’s back side the necessary amount of
drift stitches (I have 4 sc).
Fix and cut down the thread. Fill the piece with the filler. Attach the
red thread to the half-stitches of round 14 of the leg and crochet
around the trouser leg (photo 28).
photo 24 photo 25.
7 round. 2 sc, dec, (4 sc, dec)2 times, 2 sc (15) 18 round. (3 sc, dec)3 times (12)
Fill the piece with the filler.
19 round. Decrease6 times (6) Fix and tighten the thread (photo 26). On the leg, around the wire, crochet 12 sc, it is the first round of the leg continuation (photo 27). 13 1 round. (3 sc, inc)3 times (15)
2-3 round. 15 sc (2 rounds)
Fix and cut down the thread, hide the ends in the piece.

From the beginning of the leg round, moving anti-clockwise, count 5
stitches, put the marker in the 6-th stitch (photo 29).
Make the second back leg in the same way, but don’t cut down the thread,
because we will continue crocheting the body (photo 30)

BODY
Continue crocheting with the red thread.
21 round. 6 sc, make 10 ch, crochet on the first leg, starting from the
marker 18 sc, make slip stitch in the next stitch (where we already have
the first stitch of this round). Crochet on the chains 10 sc, then on the
second leg make a slip stitch in the stitch (where we already have the
sixth sc of this round), 12 sc (56) (photos 31,32).
Make slip stitches in order to avoid the holes between the pieces of the
legs. In the next round, don’t crochet the stitches in the slip stitches,
skip them.

22 round. 6 sc, crochet on the chains 10 sc, 40 sc (56)
Make 11 drift stitches, now the marking thread will go through the
middle of the back (photo 33). If the marker will go to the right, you
must make a drift stitch (dr st). Otherwise, you will not be able to
crochet the legs into the body symmetrically.
While crocheting, continue shaping the frame. Twist the wires from the
lower legs and isolate them with the tape (photo 33).

23 round. (13 sc, inc)4 times (60) 24-32 round. 60 sc (9 rounds) Change the main thread for green tread. 33 round. (only through back of stitch) 4 sc, dec, (8 sc, dec)5 times, 4 sc (54)
34-35 round. 54 sc (2 rounds)
36 round. (7 sc, dec)6 times (48) 37-38 round.48 sc (2 rounds) 39 round.5 sc, dec, (10 sc, dec)3 times, 5 sc(44)
40 round. (9 sc, dec)4 times (40) Fill all the crocheted part of the piece with the filler. 41 round. 4 sc, dec, (8 sc, dec)3 times, 4 sc (36)
42 round. (7 sc, dec)*4 times (32)
43-48 round. 32 sc (6 rounds) (photo 34)

In the next round crochet the upper legs into the body, the palms must
be turned to the body (the part can be located from any side of the leg).
49 round. 5 sc, make 5 sc with the leg stitches, 12 sc, make 5 sc with
the leg stitches, 5 sc (32) (photo 35)
In the next round, crochet on the rest stitches of the legs (photo 36).
50 round. 3 sc, dec, (6 sc, dec)*3 times, 3 sc (28)

51 round. (5 sc, dec)4 times (24) Twist the wires from the leg with the central frame, bend the sharp ends, leave 4 – 5 cm of the wire for the neck, isolate with the tape (photo 37). Fill the piece with the filler. 52 round. 1 sc, dec, (2 sc, dec)5 times, 1 sc (18)
53 round. (4 sc, dec)*3 times (15)
54-57 round. 15 sc (4 rounds)
Fix and cut down the piece. Fill the piece with the filler up to the end
(photo 38).

DESIGN OF THE SHORTS
Take the read thread. Attach the thread to the half-stitches of round
32 of the body in the beginning of the round, and crochet around the
upper part of the shorts with sc (photo 39). Crochet around the body up
to the back, up to the place where the strap from the shorts will be
located. Make 50 ch and, from the ninth stitch from the crochet,
crochet on the chains 42 sc (photo 40). Crochet around the upper part
of the shorts up to the end. Fix and cut down the tread, hide the ends
inside the piece (photo 41).

At the front part of the shorts sew the button. Fix the strap on the
button (photos 42,43).

ASSEMBLY
Insert the head hole into the frame. Sew the head on the body
(photo 44).

BUTTERFLY NET
Take the crocheting wire and cut a piece 100 cm long, bend it in two
halves and twist both parts together. Bend this piece in two halves and
in the bending point shape the circle with the diameter 4,5 – 4 cm, and
twist the ends together (photo 45). In the bottom of the net bend the
end, 5-6 cm, and isolate it with a small tape piece.

Take the brown thread and make the handle of the net.
1 round. Start 7 sc in a magic ring (7)
2-38 round.7 sc (37 rounds)
Put the piece on the net, it must close all the wire up to the bent circle.
If necessary, add or, vice versa, take away several rounds (photo 46).
Fix the thread and cut it down, leave 20 cm for sewing.

Take the beige thread and crochet the net.
1 round. Start 8 sc in a magic ring (8)
Crochet the arcs.
2round. 3 ch, 1 sc (mark the arc with the marker, it is the first arc in
the new round), (3 ch, 1 sc)*7 times (photo 47)

3-5 round. 3 ch, 1 sc in the middle of the arc (mark the arc with the
marker, it is the first arc in the new round), (3 ch, 1 sc in the middle of
the arc)7 times (3 rounds) 6-8 round.4 ch, 1 sc in the middle of the arc (mark the arc with the marker, it is the first arc in the new round), (4 ch, 1 scin the middle of the arc)7 times (3 rounds)
9-12 round.5 ch, 1 sc in the middle of the arc (mark the arc with the
marker, it is the first arc in the new round), (5 ch, 1 scin the middle of
the arc)7 times (4 rounds) 13-16 round. 6 ch, 1 sc in the middle of the arc (mark the arc with the marker, it is the first arc in the new round), (6 ch, 1 scin the middle of the arc)7 times (4 rounds)
Fix and cut down the thread (photo 48)