Amigurumi Curly Unicorn Free Crochet Pattern

Hello dear Amigurumi Knitting Lovers
Today we share a free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…

Today, the new daily crochet pattern Amigurumi, Curly Unicorn Free Crochet Pattern , I want to give you some information about this pattern;

Necessary materials:

1. Himallaya Dolphin Baby fabric, or analogues (100% polyester, 120m/100g) One

skein of primary color. A third of the magic ring in a contrasting color for knitting hooves

(the muzzle can also be made the same color as the hooves). You can also link

hooves and muzzle from Alize Softy inc knit in two threads. For knitting a mane you can

I will take any incrimination at will.

2. A small amount of yarn from YarnArt Jeans (or its equivalent with a density

approximately 50g/165 m) for knitting horns.

3. Hook No. 4 and hook No. 2.

4. Marker or marker thread to indicate the beginning of a row, several

additional markers.

5. Eyes with glittermagic rings on a safe mount d=16 mm (or your own to choose from).

6. Holofiber filler in magic rings (or synthetic fluff) about 250 g.

7. Plastic blunt needle with a wide eye for stitching parts.

To make a skirt you will need:

1. Tulle 15 cm wide and 2 to 2.5 m long

2. Needle and thread to match the tulle, as well as thread in a contrasting color.

3. Round rubber magic ring to match the tulle, about 60 cm long

4. Two beads, the diameter of the hole allows them to be pressed onto a round

an elastic band.

5. Superglue.

6. Magic ring sewing machine (inc and manufacturing in 1 way)

This master class is based on knitting a unicorn from

plush inc. The size of the toy is inc and using the same materials

densely knitting columns of magic rings and single crochet according to the “tick” principle will be

be approximately 30 cm (excluding the horn).

If you knit a Unicorn from semi-cottonmagic ring, for example, from inc YarnArt Yeans

(50 g/165 m), then the size of the toy will be approximately 17-18 cm inc.

using a magic ring hook 2-2.5 mm. In this case, the horn will need to be knitted

from inc crochet Iris 1-1.25.

Legend:

magic ring – amigurumi ring (in case of difficulties with tightening the ring

amigurumi on plush inc, you can start knitting not with a magic ring, but with two

air loops. In this case, the loops of the first row are knitted in

second loop from magic ring hook)

ch – air loop (or lifting loop)

sc – single crochet

inc – insibavmagic ring (two double crochets of magic ring in one loop)

dec – decаmagic ring (two loops inc are tied together behind the front wall with a column without

yarn over

sl-st = ps – connecting column or half-column

( ) x n, where n is the number of repetitions of loops in magic rings brackets

The parts of the toy are knitted in a spiral. The beginning of the magic ring of each row is necessary

mark with a marker or use a marker thread.

Hand magic ring

Knitting begins with hoof-colored thread. As you knit, we stuff the part

filler At the point where the handle is attached to the body, fill the filler loosely.

1. 6 sc in magic ring

(in case you have difficulty tightening the amigurumi ring on

plush inc, you can start knitting not with a magic ring, but with two air

loops In this case, the loops of the first row are knitted into the second loop

from hookmagic ring)

2. inc x 6 (12)

3. 1 sc, (inc, 2sc) x 3, inc, 1 sc (16)

4.16sc

5. change the thread to the main color, 16 sc

6. 1 sc, (dec, 2sc) x 3, dec, 1 sc (12)

7. -12. 12sc

13. dec, 10 sc

14-17. 11sc

18. dec, 1 sc, dec, 1 sc, dec, 1 sc, dec (7)

We complete the knitting with a connecting stitch.

If the part will be sewn to the body, then leave enough thread for

lengthening. If the part is tied into the body, the thread will be inside

details.

We begin knitting with hoof-colored thread. As

We fill the knitting piece tightly with filler.

(In knitting from semi-cotton magic ring in the center of the oval, on

chain level of air loops may appear

holes. I propose to close them with a chain

connecting loops connected with

thread tailsmagic ring from the beginning of knitting)

We knit a chain of 4 air loops,

start knitting in the second loop from the magic ring hook from

magic ring hook:

1. inc, 1 sc, 4 sc in 1 loop, 1 sc, inc (10)

2. 1 sc, inc, 1 sc, inc, 2 sc, inc, 2 sc, inc (14)

3. 1 sc, inc, 4 sc, inc, 1sc, inc, 3 sc, inc, 1sc

(18)

4. Magic ring chain of 18 connecting loops,

inscribed along the edge of the resulting oval with

wrong side.

5. We knit chain loops on both walls

connecting loops in the next row:

2 sc, inc, 4 sc, inc, 3 sc, inc, 4 sc, inc, 1 sc (22)

6. 8 sc, dec, 3 sc, dec, 7 sc (20)

7. change the thread to the main color, dec, 5 sc, dec, 1 sc,

dec, 1 sc, dec, 5sc (16) (in place of decass,

marked in black, install

additional marker)

8. dec, 4 sc, dec x 3, 4 sc (12)

9. 6 sc, inc, 5 sc (13)

10.13sc

11. 6 sc, inc, 6 sc (14)

12.14sc

13. 14 sc

14. inc, 13 sc (15)

15. 8 sc, inc, 6 sc (16)

Decаmagic ring, marked in black in the 7th row should be

approximately on the same level as the increment marked

black in row 15

We complete the knitting with a connecting stitch,

cut the thread, leaving a tail about 10 cm.

We knit the second leg in the same way.

We place our legs next to each other so that their noses point slightly towards

side away from each other. We will connect the legs with a chain of two air loops.

Visually we place the middle of the back of the thigh of both legs, mark them

Using additional markers, on the other leg we knit inc to this loop

required amount of sc, then do 2 ch, and inc knit into the marked

Marker loop on the left leg connecting post. Next we knit:

16. 16 sc (along the left leg), 2 sc (along the chain of air loops), 16 sc (along

in your leg), 2 sc (along the chain ch on the other side) (36)

Here we put a marker (marker thread). This place will be the beginning

next row.

You should end up with legs that

the socks look either in the same way or in different directions

sides at the same angle.

If at the site of the incision of the legs there remains

small hole, it can be sewn up

the tail of the thread remaining on the left leg.

17. (5 sc, inc) x 6 (42)

18.42sc

19. 14 sc, inc, 8 sc, inc, 18 sc (44)

Increments are located on the stomach and

should be symmetrically removed from

axis of symmetry of the toy.

20.44 sc

21.44sc

22.44sc

Between rows 23 and 24 you need to make a hole for the tail.

23. 41 sc, 2ch, 1 sc (44) (2 ch should be magically ringed exactly in the middle of the back,

if this does not happen, inc we knit the displacement loops)

24. 41 sc, 2 sc along the chain of chain stitches in the next row, 1 sc

(44)

25. 14 sc, dec, 8 sc, dec, 18 sc (42)

26.42sc

27.42sc

28. (5 sc, dec) x 6 (36)

29. 36 sc

30.36sc

31. (4 sc, dec) x 6 (30)

32.30sc

33. (3 sc, dec) x 6 (24)

We begin to tie our hands.

It is necessary to separate the axis of symmetry of the body. Hands are tied symmetrically to each other. The distance between the hands is 8 sc on the back and 8 sc on the chest. If, in knitting, there is a shift in the beginning of the row and in knitting the arms according to the pattern, it turns out that they have become asymmetrical relative to the axis of symmetry, it is necessary to knit the shift loops.

34. 4 sc, 4 sc (grabbing body loops and first hand loops in pairs), 8 sc,

4 sc (grabbing body loops and second hand loops in pairs), 4 sc (24)

35. 5 sc, 3 sc (grabbing the body loops in pairs and the remaining free ones

loops of the first hand), 8 sc, 3 sc (grabbing body loops in pairs and

remaining free loops of the second hand), 5 sc (24)

36. 24 sc (24)

37. (dec, 2 sc) x 6 (18)

Let’s continue knitting. The head starts from the next row.

38. (2 sc, inc) x 6 (24)

39. (3 sc, inc) x 6 (30)

40. (4 sc, inc) x 6 (36)

Carefully stuff the upper body and neck with filler.

41. 36 sc

42. (5 sc, inc) x6 (42)

43.– 52. 42 sc

Now you need to install the eyes if they are on safe

fastening. You can first glue eyelashes to your eyes using

superglue. Eyelashes can be taken special for toys or cut

half false eyelashes.

The eyes are located between 47 and 48 rows. Distance between eyes 7 or 8

loops

We visually separate the axis of symmetry of the unicorn’s face and evenly

We fix the eyes relative to the axis.

We stuff the neck and base of the head tightly with filler.

53. (dec, 5 sc) x 6 (36)

54. (dec, 4 sc) x 6 (30)

55. (dec, 3 sc) x 6 (24)

56.24sc

We fill the head tightly with filler.

57. (dec, 2 sc) x 6 (18)

58. (dec, 1 sc) x 6 (12)

Close the knitting with a connecting loop. We do not tighten the hole,

leave for attaching curls. If necessary, the hole can be

add filler.

Muzzle

The color of the muzzle can be chosen as desired.

(In knitting from semi-cotton magic ring in the center of the oval, at the level of the chain of air

loops, holes may appear. I propose to close them with a chain

connecting loops knitted using magic ring tails from the beginning

knitting)

We start knitting with a chain of 5 air loops. Then into the second loop

from magic ring hook:

1. inc, 2 sc, 4 sc in 1 loop, 2 sc, inc (12)

2. 1 sc, inc, 2 sc, inc, 2 sc, inc, 2 sc, inc, 1 sc (16)

3. 2 sc, inc, 3 sc, inc, 3 sc, inc, 3 sc, inc, 1 sc (20)

4.20sc

5. 20 sc.

We complete the knitting with a connecting stitch, leaving the thread

length sufficient for incision.

Fill with filler.

In the next video tutorial you can see how to sew a magic ring on a muzzle

head

The upper edge of the muzzle is located at the level of 47 rows, the lower – at the level of 41 rows. We sew the muzzle symmetrically relative to the eyes and the axis of symmetry of the body.

Ears

We knit with a thread of the color of the body.

1. 4 sc in magic ring

2.inc x 4 (8)

3.8sc

4. (1 sc, inc) x 4 (12)

5.12sc

6. 12sc

7. Fold the piece in half and knit 5

sc for both halves together.

We finish knitting with an air loop,

leave enough thread for incision

length.

No need to fill with filler!

The upper edge of the ears is incised at the level

57 rows of heads. Bottom edge – 52 rows.

Distance from the bottom edge of one ear to

the bottom edge of the other – approximately 20 loops along

forehead.

Unicorn horn

We knit from a thinner inc crochet number 2. I use inc YarnArt

Jeans

We start knitting with a ring of air loops. This is necessary in order to

so that upon completion of knitting, tightening the hole, form a sharp tip

horns. If you don’t think this is necessary, you can knit in reverse order.

starting from the last row, inc. 6 sc in magic ring.

Before casting on a chain of chain stitches, leave the tail sufficient

for incising length.

1. 21 ch lock the magic ring into the ring

2.21sc

3.21sc

4. (dec, 5 sc) x 3 (18)

5.18sc

6.18sc

7. (dec, 4 sc) x 3 (15)

8. 15 sc

9. 15 sc

10. (dec, 3 sc) x 3 (12)

11. 12 sc

12. 12sc

13. (dec, 2 sc) x 3 (9 sc)

14.9sc

15. (dec, 1 sc) x 3 (6)

We tighten the hole behind the front walls of the loops of the last row. A thread

We secure it using the connecting loop. Using tweezers or

thin stick (it’s convenient to use a magic ring pen with a washing machine at the end)

Carefully and tightly fill the horn with filler. We place the tip of the thread inside

details.

We sew the horn to the unicorn’s forehead in the center between 53 and 58 rows.

Unicorn curls The pattern for knitting rasl-st curls is read on Himallaya Dolphin Baby. When knitting from another yarn, you need to independently, experimentally, read the initial number of air loops. The color of the mane tie can be chosen at your discretion. You can use all the skeins left over from other toys and make the mane colorful and perky. If you want the curls to be tighter and thicker, you can take a hook smaller than the main one (No. 3.5 No. 3 or even No. 2.5)

For this unicorn I knitted curls like this:

1. Magic ring chain of 65 ch

2. Starting from the second loop from the magic ring hook 64 inc.

Short curls for the tail:

1. Magic ring chain of 42 ch

2. Starting from the second loop from the hookmagic ring 41 insibavmagic ring

On my head I did 7 curls + two

short for bangs

In the ponytail I used 5 short ones

curls.

I separate the curls evenly, cinching them

tails of threads inside the holes, making sure that

the length of the curls was the same. And I incishiva

curls with a juicy thread to the edges of the holes and to each

to a friend.

Magic ring I attached the curls to my head, you can see in the following

Utyazhmagic ring peephole

For tightening, you can take the thread from which the unicorn’s head was knitted or any other strong thread to match.

In the photo you can see that the magic ring and weights of the magic ring changes the expression on the unicorn’s face. Therefore, I strongly recommend not to abandon this stage in creating toys. It’s not necessary to do the tightening in exactly this way, the magic ring way I do it, if there’s something about it that doesn’t suit you. Experiment, do it your own way, achieve your unique image. You can embroider the nostrils and mouth at this stage, or later. We arrange the place for embroidery independently according to taste. Experiment with the shape of the nostrils and mouth of the magic ring, this can change the mood and character of your unicorn. For embroidery, you can use either pink plush thread or any other thread, possibly in several layers. We start and finish the magic ring embroidery in one place (in one hole). We tie both ends into a knot and inc it inside the muzzle using a needle or magic ring hook.

Embroidering eyelids and wings above the eyes with magic rings

If desired, you can embroider a magic ring over the eyelids and arrows with thread or

black, or thread to match the color of the eyes.

Additional neck support.

The curls made the head significantly heavier and over time, while playing, the head

may begin to fall to the side. I suggest that you fix it,

additionally inclining the seam along the neck in a circle.

Making a fluffy tulle skirt for

unicorns

Option #1

Take a cut of tulle 15 cm wide (I

I use bobbin tulle) about 2.5 m long. From

The length of the tulle depends on the pomp of the skirt.

Fold the tulle in half along the long end using a thread of a contrasting color

I fold the line in, stepping back approximately 1 cm from the fold. I take a long thread

(less than the length of the tulle by about 0.5 m)

Having gathered a little tulle onto the thread, I insert a rubber band along the entire length of the tulle. I tie large knots at the ends of the elastic so that the magic ring holds the tulle in the assembled state and does not fly out. We received a tulle about 50 cm long, gathered into folds. Using a sewing machine, using a thread to match the color of the tulle, I make a stitch, stepping back approximately 0.5 cm from the fold, without touching the elastic.

I measure it on a magic ring toy, which size should be the final length of the elastic band, and tie it with a strong knot. I cut off the ends, leaving approximately 2 – 2.5 cm. You can put a bead on the ends. Then add superglue to the edge of the magic ring elastic band and lower the bead to the edge to fix it