Hello dear Amigurumi Knitting Lovers,Today we share a free amigurumi crochet pattern for you.
As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Don’t forget to subscribe to receive notifications of our new free recipes.

Today, the new daily crochet pattern Amigurumi Faun Doll Free Crochet Pattern, I want to give you some information about this pattern;

Materials:
Aran / Worsted Yarn
3mm Crochet Hook
16mm Safety eyes
Small Safety Nose
5cm Canvas Doll Shoes
Wire
Polyester Fiberfill
Darning Needle

Abbreviations:
CH -Chain
BOBBLE -Bobble Stitch
(Yarn over, insert hook into stitch, yarn over and pull up a loop, yarn
over and pull through two loops) x4, yarn over and pull through all
remaining loops on hook.
DC -Double Crochet
DC INC -Double Crochet Increase
DEC -Decrease
FLO -Front Loop Only
HDC -Half Double Crochet
INC -Increase
MR -Magic Ring
SC -Single Crochet
SL ST -Slip Stitch
TRIPLE DC INC -Triple Double Crochet Increase (3 DCs in the same stitch)

Arms:
● Make 2
● 3mm hook & aran yarn
● Using body colour

1. SC5 in MR (5)
2. INC x5 (10)
3. SC10 (10)
4. SC10 (10)
5. BOBBLE, SC9 (10)
6. (DEC, SC3) x2 (8)
7. (DEC, SC2) x2 (6)
8. (INC, SC2) x2 (8)
   9 – 26. SC8 (8)
   Fasten off.

Legs:
● Make 2
● 3mm hook & aran yarn
● Using body colour
● You’ll want two lengths of wire about 12″ long for the legs and two lengths for the arms about 6″ long.

1. CH5, SC3, 3 SC into the last chain and continue round to the other side of the chain, SC2, INC (10)
   2 – 6. SC10 (10)
2. SC2, DC INC x3, SC5 (13)
3. SC2, DC DEC x3, SC, SL ST 5 (goes one stitch beyond) (10)
4. SC5, SC5 over the slip stitches working into the stitches from row 7 (10)
   10 – 12. SC10 (10)
   Insert wire into the foot and begin to stuff. (I bend the end of the wire back on itself so it doesn’t
   poke out of the foot)
   13 – 33. SC10 Don’t forget to stuff the leg as you go (10)
   Finish row 33 at the right side of the leg (toes facing you) and change to underwear colour.
5. SC10 (10)
6. Fasten off the first leg only. DO NOT FASTEN OFF THE SECOND LEG.

Body:
Continuing in underwear colour

1. Make sure you are starting at the side of leg ( you may want to add or remove a SC to get to the
   right spot depending on your tension). CH2, join to the most central stitch in the side of the first leg
   with a SC, SC9 in the remaining stitches of the first leg, SC2 in the chain, SC10 around the second
   leg, SC2 in the other side of the chain. (24)

SC until you the side of the leg, the increases in the next row will be where the hips are.

2. INC x2, SC10, INC x2, SC10 (28)
   3 – 5. SC28 (28)
3. SC2, DEC, SC12, DEC, SC10 (26)
4. SC2, DEC, SC10, DEC, SC10 Change to body colour at the end of this row (24)
5. BLO (SC3, DEC, SC3) x3
   9 – 10. SC21 (21)
6. (DEC, SC5) x3 (18)
   12 – 13. SC18 (18)
7. SC2, (INC, SC7) x2 The increases are made at the sides of the body (20)
8. SC2, (INC x2, SC7) x2 (24)
9. SC24 (24)
   Continue to stuff the body as you go.
10. SC3, INC, SC11, INC, SC8 (26)
    Attaching the arms.
    A SC3 Or until you get to the four most central side stitches as this will be where we attach the arms

B. SC4 through the arm and the body at the same time.
go through the inside of the doll’s arm and into the body
C. SC9 or until you get to the four stitches you wish to attach the second arm
D. SC4 through the second arm and the body at the same time.
go through the inside of the dolls arm and into the body
E. SC6 or to the end of the row (26)
Add wire to the arms, folding a small amount of wire back on itself so it doesn’t poke out through
the doll’s hands. Stuffing arms is optional. Continue stuffing the body as you go.
A. SC, DEC
B. SC4 through the arm and body at the same time.
*you’re working through the remaining four stitches of the arm, going through the right side of arm and into the body*
C. (SC, DEC) x3
D. SC4 through the arm and body at the same time.
E. (SC, DEC) x2 (20)
At this point you may want to tape up your wires so they’re not poking out all over the place. I use electrical tape for this.

20. DEC x10 (10)
21. SC, DEC, SC3, DEC, SC2 (8)
    22 – 23. SC8 (8)
    We are now starting the doll’s head.
22. FLO INC x8
23. (SC, INC) x8 (24)
24. (SC2, INC) x8 (32)
25. (SC3, INC) x8 (40)
    28 – 36. SC40 (40)
    Insert safety eyes between rows 32 & 33 with about 7 stitches in between.
    Insert safety nose between rows 30 & 31.

37. SC40 (40)
38. (SC3, DEC) x8
    If you wish to match the doll’s scalp to your chosen hair colour then make sure you change colour
    at the end of row 38.
    (32)
39. SC32 (32)
40. (SC2, DEC) x8 (24)
41. (SC2, DEC) x6 (18)
    If you are using Darkside antlers add them between row 39 & 40. Carefully holding the antler with
    thumb and index finger push the washer back on and then screw on the nut.
42. (SC, DEC) x6 (12)

43. DEC x6 (6)
    Fasten off leaving a yarn tail to sew the hole shut.

Ears:
● 3mm hook & aran yarn
● Using body colour.

1. SC4 in MR (4)
2. (SC, INC) x2 (6)
3. (SC2, INC) x2 (8)
4. (SC3, INC) x2 (10)
5. (SC4, INC) x2 (12)
6. (SC5, INC) x2 (14)
7. SC14 (14)
8. SC14, skipping 5 stitches, SL ST in the 6th stitch and fasten off.
   Sew the ears to the side of the head. (14)

Top:
● 3mm hook & aran yarn – The top will go on the doll from the feet up, it may be a little bit of a squeeze to get it
on, if yours is a little too snug try crocheting a little more loosely.
CH30, SL ST into the first chain and CH1. Be careful not to twist the chain.
You will work the first stitch of each row in the same stitch that you slip stitch into.

1. SC30, SL ST into the first sc you made in row 1, CH1. (30)
2. SC4, (DC INC) x7, SC8, (DC INC) x7, SC4, SL ST into the first ST, CH1 (44)
3. SC4, CH4, SKIP all 14 DC stitches, SC8, CH4, SKIP all 14 DC stitches, SC4, SL ST into the first ST,
   CH1
   (16)
4. Ignore the DCs from row 2 and work into the chain stitches.
   SC4, SC4, SC8, SC4, SC4, SL ST into the first ST, CH1
   (24)
5. SC24, SL ST into the first stitch, CH1 (24)
6. SC24, SL ST into the first stitch, Fasten off. (24)

Skirt:
● 3mm hook & aran yarn.
CH24, SL ST into the first chain and CH1. Be careful not to twist the chain.
You will work the first stitch of each row in the same stitch that you slip stitch into.

1. HDC24, SL ST into the first sc you made in row 1, CH1. (24)
2. BLO [ (HDC INC, HDC5) x4 ] SL ST into the first ST, CH2 (28)
3. DC28, SL ST into the first ST, CH2 (28)
4. TRIPLE DC INC in each stitch around, SL ST into the first ST, CH2 (84)
5. DC84, SL ST into the first stitch, CH2 (84)
6. DC84, SL ST into the first stitch, CH2 (84)
7. DC84, SL ST into the first stitch, CH1
   If you want your skirt to be longer then repeat this row.
   (84)
8. (SC7, CH3, starting in the 2nd chain, SL ST, SC) x12 SL ST into the first stitch, Fasten off.
   Belt: CH20, working into the remaining front loops from row 1, SL ST24 (keep your SL ST loose), CH20,
   Fasten off.

Antlers:
● 3mm hook & aran yarn.
Part 1.

1. SC4 in MR (4)
2. SC4 (4)
3. SC4 (4)
4. INC, SC3. Fasten off with a short yarn tail. (5)
   Part 2.
5. SC4 in MR (4)
6. SC4 (4)
7. SC4 (4)
8. INC, SC3 (5)
9. SC5 (5)
10. SC5. Fasten off with a short yarn tail. (5)
    Part 3.
    1 SC4 in MR (4)
11. SC4 (4)
12. SC4 (4)
13. INC, SC3 (5)
14. SC5 (5)
15. SC5 (5)
16. SC1, start a decrease in the next available stitch and then complete the decrease in the second
    stitch from the last row of part 1, SC3 around part 1, start a decrease in the last available stitch on
    part 1 and complete the decrease in the next available stitch on part 3, SC2 around part 3.
    (8)
17. SC3, DEC, SC3 (7)
18. SC3, INC, SC3 (8)
19. DEC, SC2, INC, SC3 (8)
20. DEC, SC6 (7)
21. SC3, start a decrease in the next available stitch and complete the decrease in the last stitch of the
    last row of part 2, SC3 around part 2, start a decrease in the next available stitch on part 2 and
    finish the decrease in the next available stitch on part 3, SC2 around part 3.
    (10)
22. DEC, SC8 (9)
23. SC4, DEC, SC3 (8)
24. DEC, SC2, INC, SC3 (8)
25. DEC, SC2, INC, SC3 (8)
26. SC8 (8)
27. SC8, fasten off with a long yarn tail for sewing.

Hair:
● Some fun chunky yarn.
For this doll I’ve used Lion Brand Homespun…it’s a little fluffy but I think it looks good. You can use
any yarn of your choosing but I find chunky works best. Or you can use my doll locs which are
available on my website occasionally.

1. Cut your yarn into lengths…bear in mind when you attach the yarn length will be folded in half so
   don’t cut them too short.

Inset hook into one of the stitches on the scalp.

Fold a strand of yarn in half and pull the center point through the scalp.

Take the loose ends of the strand and thread them through the loop.

Tug the ends to pull tight. Repeat across the scalp until your doll has a full head of hair.
*You don’t have to add a strand to every stitch or you may find the hair is too thick, every other
seems to be sufficient.

Make 2.
SANDAL SOLE
(Using colour for the sole of the sandal.)

1. CH5, in the back bump of the second chain INC, SC2, INC. (6)
2. Working back down the other side of the chain, SC4, INC. (6)
3. SC, Inc, SC2, Inc x3, SC3, Inc, SC. (17)
4. SC, Inc, SC5, Inc, SC, Inc, SC6, Inc, SC2 (goes one stitch beyond). (22)
5. For sole: FO with Sl St into the next stitch and set aside.
   SANDAL TOP
6. Follow instructions for 1-4 for the Sole DO NOT FINISH OFF
7. Placing the wrong sides of the work together, Sl St the two pieces together all the way around.

After the last Sl St, Ch2, skip 2 spaces and place a Sl St to secure. Ch 1, Turn.

Using the small loop at the back of the sandal from starting the Sl St: DC3, Ch4, Sl St into the top of
the last DC made (this creates a loop), DC3, skip 2 stitches and Sl St. FO (this creates the heel
backing)

Using top color create Toe Piece: attach Yarn at the side just before the Inc stitches and around the
Sl St you used to secure the soles together. SC3, Ch 1, Turn.

(SC3, Ch1, Turn) x7 (3)

SC3, FO leaving tail to stitch in place. (3)

Note: If the toe piece does not fit over your doll’s foot securely, make another row or two (or less if
too loose) before stitching in place.
For sandal tie: Ch 42 FO. String through the loop at the heel and tie around her ankle.
Alternatively, you can use thin ribbon OR make a longer chain and wrap around the ankle and shin to
make more gladiator style sandals for your faun. Add a flower or bow to the toe piece – whatever you
want to dress up your doll!

Have fun with it!